Pins

Most Recent Pins (264)

BRANDAN HAJEK
Hajek Heating and Cooling LLC provided a gas furnace replacement estimate for a homeowner in Salem, Oregon. The existing Coleman unit was nonfunctional, and previous repair quotes were high. The technician assessed the home, took measurements, and discussed installation options. An estimate was sent and is pending the customer’s review.
Pin Photo
BRANDAN HAJEK
A technician in McMinnville, Oregon conducted an on-site consultation for the installation of a ductless mini-split system with three head units. The visit allowed the contractor to assess the space and collect details needed to prepare a detailed estimate for the proposed HVAC system installation.
BRANDAN HAJEK
A technician in Salem, Oregon, completed a warranty diagnostic and fan motor replacement on a recently installed HVAC system. The customer requested service after noticing performance issues during a routine maintenance visit included with their original installation package. The technician confirmed the fan motor failure and replaced the part under the manufacturer’s warranty.
BRANDAN HAJEK
Hajek Heating and Cooling LLC inspected a Prairie stand-alone gas fireplace in Salem, Oregon. The customer reported the pilot light shutting off when the thermostat switch is set to auto. The technician investigated and provided an estimate for a new thermostat and gas valve to address the issue.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
A technician in Gervais, Oregon installed a new condensate pump on a Daikin ductless mini-split system. The existing gravity drain was pushing moisture improperly, causing leaks. The new pump fixed the drainage issue and restored proper system function.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC replaced a Goodman gas furnace with a Lennox Merit ML196E furnace for a customer in Keizer, Oregon. The team removed the existing unit and installed the new high-efficiency system to improve heating performance and energy use.
Pin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC completed a seasonal furnace tune-up in Salem, Oregon. The technician inspected a Ruud gas furnace after the homeowner reported unusual energy usage. The service improved system efficiency and included recommendations for parts that may need future replacement.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC replaced a faulty thermostat at a retail store in Corvallis, Oregon. The technician inspected the rooftop HVAC unit and identified the thermostat issue. A digital replacement was installed using stocked parts, and the system was tested for proper function before departure.
Pin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC provided an estimate for a full HVAC system replacement and complete ductwork installation in Forest Grove, Oregon. The request came from a returning customer who recently purchased a partially completed home and needed the heating and cooling infrastructure assessed and updated.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC replaced a faulty gas fireplace ignitor for a customer in Dayton, Oregon. The unit had failed to ignite consistently. After identifying the issue during inspection, the technician removed the defective part and installed a new ignitor to restore reliable operation.
BRANDAN HAJEK
Hajek Heating and Cooling LLC installed a Daikin ductless heat pump with three zones in Carlton, Oregon. The project followed an in-home consultation and estimate approval through a home improvement store’s contractor network. The team completed the scheduled installation after collecting a deposit.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
A technician from Hajek Heating and Cooling LLC inspected a malfunctioning water heater in Eugene, Oregon. The service team responded within 18 hours and diagnosed the unit on-site. This visit focused on identifying heating system issues to support timely repairs.
BRANDAN HAJEK
A technician in Salem, Oregon, diagnosed a ceiling fan that would not turn on, though its light still worked. The inspection confirmed a failed motor due to wear. The technician sent a replacement estimate to the property manager for approval.
Pin Photo
BRANDAN HAJEK
Hajek Heating and Cooling flushed a Bradford White natural gas water heater tank and three cartridges to restore water pressure in a managed property. This service addressed buildup from regular use. The job took place in Salem, Oregon.
BRANDAN HAJEK
Hajek Heating and Cooling LLC completed ductless mini-split system maintenance at a local office in Salem, Oregon. Technicians inspected units, confirmed manufacturer specifications, and replaced a faulty capacitor. They also advised blower wheel and coil cleaning to support system performance.
Pin Photo
Pin PhotoPin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC completed a dryer vent cleaning in Milwaukie, Oregon. The service addressed a buildup that had prevented the dryer from working for several weeks. The team cleared the vent to help restore normal airflow and improve dryer performance.
Pin Photo
Pin PhotoPin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC repaired multiple leaks in a newly installed shower stem and valve after inspection. The work was completed during the service visit. This plumbing repair took place in Portland, Oregon.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC completed a diagnostic on a zoning system using Emme Controls in Lake Oswego, Oregon. The system failed to respond to room-specific commands. The team identified the issue and scheduled a repair to restore proper temperature control in each room.
BRANDAN HAJEK
Hajek Heating and Cooling repaired eight damaged ductwork runs for a maintenance plan member in Tigard, Oregon. The team inspected the system, identified the necessary repairs, and completed the work during the scheduled visit. Membership benefits provided service discounts during the repair process.
BRANDAN HAJEK
Hajek Heating and Cooling LLC inspected a faulty water heater for a homeowner in Seattle, Washington. After diagnosis, the team confirmed the need for replacement and provided an estimate for a new 50-gallon standard water heater.
BRANDAN HAJEK
Hajek Heating and Cooling LLC completed a furnace inspection for a new homeowner in Lake Oswego, Oregon. The team identified buildup on the indoor and outdoor coils and the blower wheel. They provided a cleaning estimate, which the customer approved. A follow-up appointment was then scheduled to complete the recommended HVAC cleaning services.
Pin Photo
Pin PhotoPin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC replaced a faulty thermostat and gas valve on a Lennox heat pump in Forest Grove, Oregon. The technician restored heat by bypassing the thermostat at the furnace and completing necessary repairs to ensure proper system function.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC replaced a failed 100-gallon water heater with a new 50-gallon unit in Corvallis, Oregon. The technician identified rusted connectors and a broken recirculating pump during the initial diagnostic. After providing an estimate, the team completed the full installation as requested by the customer.
BRANDAN HAJEK
Hajek Heating & Cooling diagnosed a gas fireplace in Corvallis, OR. The technician identified a faulty blower wheel and heat sensor and replaced both components.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC provided emergency plumbing repair in Salem, OR. A homeowner reported a water leak behind a garage wall. The technician arrived within an hour, identified a bracket piercing the hot water line, and worked with the customer to assess damage and complete the repair.
Pin Photo
BRANDAN HAJEK
Hajek Heating & Cooling replaced a gas furnace for a homeowner in Salem, OR. After diagnosing multiple issues, the customer chose a full system replacement. Technicians installed a Lennox Merit ML180E gas furnace, ensuring reliable heating.
Pin Photo
BRANDAN HAJEK
A homeowner in Salem, OR, scheduled maintenance for their Mitsubishi ductless mini-split. The technician cleaned the washable filter with a non-rinse foam and recommended a blower wheel cleaning. System operation was tested and confirmed. Regular maintenance helps maintain efficiency and performance for ductless heat pump systems.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
A homeowner in Salem, Oregon, needed ductwork repairs due to unsecured sections causing poor airflow. Hajek Heating & Cooling secured the ductwork in the crawlspace, restoring proper air circulation.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC provided emergency HVAC repair in Mill City, Oregon. A technician replaced a failed capacitor, performed system maintenance, and added a leak seal with R22 refrigerant. The system was tested and restored, ensuring proper operation for the homeowner and their guests.
BRANDAN HAJEK
Hajek Heating and Cooling LLC provided an emergency diagnostic in Molalla, Oregon, for a heat pump that was clicking continuously and tripping breakers. The inspection identified the issue, ensuring proper function and preventing further electrical damage.
BRANDAN HAJEK
A technician in Mount Angel, OR, performed an emergency diagnostic on a Bryant HVAC system. The inspection revealed a faulty capacitor, which was replaced during the visit. This repair ensured the system remained operational while the homeowner was away.
Pin Photo
BRANDAN HAJEK
A homeowner in Hillsboro, Oregon, reported an electric furnace that wouldn't turn on. A technician from Hajek Heating & Cooling inspected the unit and found burned wires, corrosion, and poor performance. Due to the furnace's condition, a replacement was recommended, and an estimate was provided.
Pin Photo
BRANDAN HAJEK
Hajek Heating & Cooling diagnosed a Honeywell thermostat issue in Silverton, Oregon. The thermostat was not connecting to the furnace, leaving the home without heat. The technician inspected the system to identify the problem and restore proper function.
BRANDAN HAJEK
A homeowner in Wilsonville, Oregon, needed ductwork repairs after a damaged part allowed insulation to enter the floor vents. Hajek Heating and Cooling LLC identified the issue and restored proper airflow, ensuring the system worked efficiently.
BRANDAN HAJEK
Hajek Heating & Cooling repaired a Rheem Prestige gas furnace in Portland, Oregon. A faulty pressure switch had left the system non-functional. The technician sourced a replacement and restored operation within hours. After installation, they tested the system to confirm proper performance before completing the job.
BRANDAN HAJEK
A homeowner in Salem, Oregon, had a Montego gas fireplace that triggered the smoke detector during use. Hajek Heating & Cooling LLC inspected the unit and found a failing seal around the glass door, which was causing a leak. Proper sealing is essential to prevent leaks and ensure safe operation.
Pin Photo
BRANDAN HAJEK
A real estate agent in Aumsville, Oregon, requested service for a Goodman gas furnace that was not turning on. The technician diagnosed a failed inducer motor and identified overdue maintenance. An estimate was provided, approved, and the necessary repairs were completed to restore proper furnace operation.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
A homeowner in Portland, Oregon, needed heat pump repair after their system displayed an error code. Diagnosis revealed a failed control board and suction line thermistor. Both components were replaced, and the system was tested for proper function. The technician also recommended maintenance to improve airflow and efficiency.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating & Cooling installed a 50-gallon Bradford White natural gas water heater in McMinnville, OR. The project included replacing an American Standard furnace with a Lennox Elite EL18XPV heat pump and upgrading toilets. A Lennox 240 programmable thermostat was also installed for improved temperature control.
Pin Photo
Pin PhotoPin PhotoPin Photo
BRANDAN HAJEK
A homeowner in Carlton, OR, requested an estimate for a mini-split installation. Our technician conducted an in-person consultation, reviewing heating and cooling needs and available options. An estimate will be provided via email.
BRANDAN HAJEK
Hajek Heating & Cooling serviced a Heat-N-Glo gas fireplace in Salem, Oregon. The technician diagnosed a faulty gas valve, cleaned the glass, added embers, adjusted the gas valve, and brushed out the unit. After maintenance, the fireplace was tested to ensure proper operation.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
A homeowner in West Linn, Oregon, needed help with a gas fireplace that was not responding to controls. Hajek Heating & Cooling identified a faulty controller and replaced it. After installation, the technician tested the system to confirm proper operation.
Pin Photo
BRANDAN HAJEK
Hajek Heating and Cooling LLC provided gas fireplace cleaning, a furnace inspection, and installed a Reme Halo LED air purification system for a homeowner in Clackamas, OR. These services ensured efficient heating and improved indoor air quality.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating & Cooling serviced a Lennox gas furnace and cleaned a dryer vent in Salem, OR. The furnace maintenance ensures reliable heating, while the vent cleaning improves dryer efficiency and reduces fire risk. Regular service helps maintain system performance and safety.
BRANDAN HAJEK
Hajek Heating & Cooling provided gas fireplace repair and maintenance in Woodburn, Oregon. The technician replaced a faulty gas valve and assembly, ensuring safe operation. After the repair, the customer opted for a performance maintenance service, including a glass cleaning, to improve efficiency and appearance.
Pin Photo
BRANDAN HAJEK
Hajek Heating & Cooling performed seasonal maintenance on a Bryant furnace in Salem, OR. The system was in good condition. Recommendations included a chemical cleaning of the blower wheel and more frequent 1-inch filter replacements. Regular maintenance helps improve furnace efficiency and longevity.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating & Cooling repaired disconnected dryer ductwork for a rental property in Lebanon, Oregon. The team ensured proper ventilation by securely reattaching the duct, improving safety and efficiency.
BRANDAN HAJEK
A technician in Portland, OR, located and repaired a gas leak on a Coleman furnace. The issue was found at the gas valve after a customer reported a small leak discovered during an inspection. The repair restored safe operation of the heating system.
Pin Photo
BRANDAN HAJEK
Hajek Heating & Cooling replaced a 25-year-old furnace and heat pump with a Lennox Merit ML17XP1 heat pump and ML180E furnace in Vernonia, OR. The installation included a one-year maintenance plan. A technician inspected the system and confirmed it was operating within specifications.
Pin Photo
Pin PhotoPin Photo
BRANDAN HAJEK
Hajek Heating & Cooling installed a 50-gallon Bradford White electric water heater for a customer in Salem, Oregon. The job included adding a shut-off valve for easier maintenance. The customer received a free estimate before proceeding with the installation.
Pin Photo
Check-ins - Reviews - Content - Ranking